Ah yes, they will be, and they will be the first to offer it in your area. Still don't know if it will be automatic with BT, it might actually, but not sure.
Ah yes, they will be, and they will be the first to offer it in your area. Still don't know if it will be automatic with BT, it might actually, but not sure.
Well i'm swapping to a ADSL2+ provider soon.
I currently get 7mbs so i'm hoping for about 11mbs.
THIS THREAD IS MAGIC because I got my email today too
March 11 is 21cn day for moi
Upload going up would be more important than download getting better.. I'm only getting 3 1/2 ish but it's reliability I want... not speed.
Woohoo....
/pause
ooh.. new router needed.
Originally Posted by Advice Trinity by Knoxville
Well BT must be getting it sorted at last just had my notice 24-2-2010 switch over . A bit late should have been the end of last summer.( was the target date.) well they have got to get a move on before adsl2 installs are past the sell by date. I should think with the way things are going we will all be getting FTTC in the next 5 years.
Not bad
This is not bad for my connectionI hope it improves when I eventually get ADSL2Code:Mode : G.DMT Type: Interleave Line Coding : Trellis On Status : Link Up Downstream Upstream Rate (Kbps) : 6592 448 SNR Margin (dB) : 9.0 21.0 Attenuation (dB) : 36.0 15.5 Output Power (dBm) : 12.1 19.8
For some reason, my output power for downstream is 0.0
My ADSL2+ connection (with O2) was activated yesterday. When I was on MaxDSL I got about 4Mbit. Now I'm getting this:
The downstream SNR seems to fluctuate between 4.5-6dB.Code:o2#sh dsl int atm0 ATM0 Alcatel 20190 chipset information ATU-R (DS) ATU-C (US) Modem Status: Showtime (DMTDSL_SHOWTIME) DSL Mode: ITU G.992.5 (ADSL2+) Annex A ITU STD NUM: 0x03 0x2 Chip Vendor ID: 'STMI' 'BDCM' Chip Vendor Specific: 0x0000 0x918F Chip Vendor Country: 0x0F 0xB5 Modem Vendor ID: 'CSCO' ' ' Modem Vendor Specific: 0x0000 0x0000 Modem Vendor Country: 0xB5 0x00 Serial Number Near: FCZ1007219T Serial Number Far: Modem VerChip ID: C196 (0) DFE BOM: DFE3.0 Annex A (1) Capacity Used: 91% 99% Noise Margin: 4.5 dB 6.0 dB Output Power: 18.5 dBm 12.0 dBm Attenuation: 43.5 dB 27.0 dB FEC ES Errors: 0 0 ES Errors: 0 25 SES Errors: 0 0 LOSES Errors: 0 0 UES Errors: 0 401679 Defect Status: None None Last Fail Code: None Watchdog Counter: 0x87 Watchdog Resets: 0 Selftest Result: 0x00 Subfunction: 0x00 Interrupts: 12515 (0 spurious) PHY Access Err: 0 Activations: 4 LED Status: ON LED On Time: 100 LED Off Time: 100 Init FW: init_AMR_4.0.017.bin Operation FW: AMR-E-4.0.017.bin FW Source: external FW Version: 4.0.17 DS Channel1 DS Channel0 US Channel1 US Channel0 Speed (kbps): 0 9378 0 1188 Cells: 0 6505 0 88587771 Reed-Solomon EC: 0 48249 0 0 CRC Errors: 0 432 0 36 Header Errors: 0 407 0 95 Total BER: 0E-0 3284E-9 Leakage Average BER: 0E-0 1230E-9 Interleave Delay: 0 43 0 11 ATU-R (DS) ATU-C (US) Bitswap: enabled enabled Bitswap success: 0 0 Bitswap failure: 0 0 LOM Monitoring : Disabled
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
They missed quite a few deadlines in the process amongst other things. There's a saying about infinate monkeys somewhere in there
Remember, my post was a response to Zak hoping they under promise and over deliver. Something I know BT as an organisation are simply incapable of through direct experience many, many times.
"In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship."
There are currently 1 users browsing this thread. (0 members and 1 guests)