its version 1202 mate
its version 1202 mate
****************************************************************************************************
Asus P5B (Standard) | C2D E6300 O/C @2.8Ghz | Corsair 1GB Kit (2x512MB) DDR2 800MHz/PC2-6400 (TWIN2X1024A-6400) CL5-5-5-12 | 2 X HITACHI 250GB T7K500 SATA II 7200RPM | POV 8800GTS PCI-E 320Mb | ACER AL1914 | WIZARD Wi20A WITH 600W STANDARD PSU | WIN XP
****************************************************************************************************
as i said earlierif your at 110 try nudging it up to say 115 1mhz at a time 2 see if u find a point were it workshard drives are ok up to about 120
It could also be that bios 1202 is the problem, ive seen two other people today with it. Might be worth flashing to the bios before 1202.
well clunk and supershanks...thank you for your input and advice. So far since upping the PCI-E to 115mhz, i rebooted the pc over 10 times and things look good as the gpu now always show 16x.
If this changes anytime, i may then on clunk's advice, downgrade lower than bios ver 1202.
thanks again guys
****************************************************************************************************
Asus P5B (Standard) | C2D E6300 O/C @2.8Ghz | Corsair 1GB Kit (2x512MB) DDR2 800MHz/PC2-6400 (TWIN2X1024A-6400) CL5-5-5-12 | 2 X HITACHI 250GB T7K500 SATA II 7200RPM | POV 8800GTS PCI-E 320Mb | ACER AL1914 | WIZARD Wi20A WITH 600W STANDARD PSU | WIN XP
****************************************************************************************************
There are currently 1 users browsing this thread. (0 members and 1 guests)