LinkBack URL
About LinkBacksNot even manually setting it? Remember if you set the the RAM to be at 800MHz, because it is DDR (Double Data Rate) you will need to FSB at 400MHz.
It might also be called Synchronous or Sync.
Not even manually setting it? Remember if you set the the RAM to be at 800MHz, because it is DDR (Double Data Rate) you will need to FSB at 400MHz.
It might also be called Synchronous or Sync.
Nope. P5KPL-AM only has 1:2 and 3:5Originally Posted by nightkhaos
I see what you mean about the memory dividers on that board, not very extensive. May want to check this out : http://forums.anandtech.com/messagev...readid=2279732 .
One of the posters further down got your mobo and the e5200 up to "3.7GHz (296x12.5) at cpu voltage 1.25V+150mV (~1.31V according to OCCT)" . (quoting isosunrise)
Yeah. Mine's stable at 3.5ghz with +50mv. So with +150mv I'm hoping, that with a new cooler, I can hit the magical 4.0ghz.
Going to go with the Ultima 90 but I need a fan. A 92mm one was already suggested but surely a 120mm would be better? Any suggestions on a fan for ~£5?
No problems with the 92mm fan for me. A 120 can be used but I'm not sure how much of a difference it makes.
Edit: According to this there is around a 1C difference.
Oh cool, I already have an Antec Tricool 92mm so think I will use that. Shall order tomorrow probably (Y)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote