Cant get to 400Mhz FSB...

[DaBeeeenster]

Cool! I installed that but had not run it. Mad program!

For the memory controller timings, where do I want to be aiming?

[Stoo]

If it's standard crucial then it'll be cas 3 so I wouldn't try anything too crazy, if it's set by spd in the bios then the timings should be automatic.

You might be able to get it down to cas 2.5 without too much hassle, but I think cas 2.0 would be pushing it..

Standard settings are cas 3-4-4-8 at 2.5V, but cas 2.5-3-3-7 should work okay..

If that works then you can try lowering the settings down to 2-2-2-6, but do it one setting at a time, but it probably won't work at 400..

[Stoo]

Hmm, after having a hunt about, it seems that DDR 400 (2.5:7:3:3) is probably the best that it'll manage

[Flash]

wohoo!

Currently running at 200x12=2400 Mhz! Going through a test of Prime95 now. What other programs are good for stability testing? Also, at 1.75 volts to the CPU, how much more can I push through it (temps permitting) before it gets dodgy?

wahay! nice one mate