A64 3000 Venice on A8n Premium OC

[Sabre]

has DDR rates for dividers so 200,266 (cant get this to work under any circumstances),333,400,466 etc...

Worried about increasing chipset voltage as its cooled by heatpipe not fan...

[oralpain]

You should not need to up chipset voltage. If you need to drop HTT to 2x before upping voltage. I highly doubt you will see a difference, performance wise.

[Sabre]

OK I will try the following tonight...

HTT x3 , divider 200DRR (Lowest), and push up from 250, stock voltage fails around 270 so ill push that from there.

My aim is to get to 300 HTT, so anyone else with this board done it?

[Sabre]

ok rasied vcore to 1.5 and can now run stable at 2.4 but bombs out at 290mhz ....

I say stable at 2.4 loosly, I have the HTT x3 @ 270 with memory on lowest divider in effect taking the memory and the HTT topend level out of the equation. Yet I cannot reach 300 fsb even with the vcore pumped to 1.5. Does this need to be pushed higher, or can it be safly pushed higher ?

Any help from relvant system owners would be great

[Sabre]

Can the chipset voltage be increased safely ? if so to what ?