Product Idea : Scan case badges

[Agent]

I have a row of case badges, a Scan one would look ace there too

edit - ack, title is supposed to be "product idea"

[Chris P]

Agent

PM Sent

[AndR]

Hi,

I am experiencing with testing software (sandra) that the speed of memory is 667MHz.
My memory: Corsair DDR2 TwinX800MHz 2048MB = 2x1GB DIMM for dual channel

Logical/Chipset 1 Memory Banks
Bank 0 512MB DDR2-SDRAM 5.0-5-5-15 (tCL-tRCD-tRP-tRAS) CR1
Bank 1 512MB DDR2-SDRAM 5.0-5-5-15 (tCL-tRCD-tRP-tRAS) CR1
Bank 4 512MB DDR2-SDRAM 5.0-5-5-15 (tCL-tRCD-tRP-tRAS) CR1
Bank 5 512MB DDR2-SDRAM 5.0-5-5-15 (tCL-tRCD-tRP-tRAS) CR1
Shared Memory 8MB
Channels 2
Speed 4x 166MHz (664MHz data rate)
Multiplier 5/8x
Width 64-bit
Memory Controller in Processor No
Performance Acceleration Technology Yes
Refresh Rate 7.80µs
Power Save Mode No
Fixed Hole Present No

Memory Module 1
Manufacturer Corsair
Model CM2X1024-6400C4
Extended Information mVNP 7
Type 1GB DIMM DDR2-SDRAM
Technology 16x(64Mx8)
Speed PC2-6400U DDR2-400
Standard Timings 5.0-5-5-18 (tCL-tRCD-tRP-tRAS)
Version 1.2
Date of Manufacture 2006. július 16.
Memory DC Line 1.8V
Set Timing @ 400MHz 5.0-5-5-18 (tCL-tRCD-tRP-tRAS)
Set Timing @ 270MHz 4.0-3-3-12 (tCL-tRCD-tRP-tRAS)
Enhanced Performance Profiles Yes
Profile @ 400MHz: Optimal 4-4-4-12 (tCL-tRCD-tRP-tRAS) CR2 5.3V

Memory Module 2
Manufacturer Corsair
Model CM2X1024-6400C4
Extended Information mVNP 7
Type 1GB DIMM DDR2-SDRAM
Technology 16x(64Mx8)
Speed PC2-6400U DDR2-400
Standard Timings 5.0-5-5-18 (tCL-tRCD-tRP-tRAS)
Version 1.2
Date of Manufacture 2006. július 16.
Memory DC Line 1.8V
Set Timing @ 400MHz 5.0-5-5-18 (tCL-tRCD-tRP-tRAS)
Set Timing @ 270MHz 4.0-3-3-12 (tCL-tRCD-tRP-tRAS)
Enhanced Performance Profiles Yes
Profile @ 400MHz: Optimal 4-4-4-12 (tCL-tRCD-tRP-tRAS) CR2 5.3V


Can somebody tell my why these memory runs only 667 MHz?

Some screenshuts from tools: (astra, hwinfo)
http :// andr.tar.hu

Thanks!
A

[Clunk]

Its because you need a Scan case badge.

[redddraggon]

Hi,

I am experiencing with testing software (sandra) that the speed of memory is 667MHz.
My memory: Corsair DDR2 TwinX800MHz 2048MB = 2x1GB DIMM for dual channel

................ half an hour later..................

Set Timing @ 400MHz 5.0-5-5-18 (tCL-tRCD-tRP-tRAS)
Set Timing @ 270MHz 4.0-3-3-12 (tCL-tRCD-tRP-tRAS)
Enhanced Performance Profiles Yes
Profile @ 400MHz: Optimal 4-4-4-12 (tCL-tRCD-tRP-tRAS) CR2 5.3V


Can somebody tell my why these memory runs only 667 MHz?

Some screenshuts from tools: (astra, hwinfo)
http :// andr.tar.hu

Thanks!
A

What a wierd thing to post in this thread

[Funkstar]

And the point of quoting all that is your reply was what?

[Agent]

AndR - I have no doubts that your issue is caused by the lack of a sexy Scan case badge.

The few issues I was having with my system have all but disappeared when my rig heard some was in the post. The fear the poor thing must have gone into.

Too late though. Im a no mercy man myself. As soon as they arrive they will be stuck in the most appropriate place to scare off any electronic beavers that think they can cause trouble.

I owe you one ChrisP.
Many thanks

[AndR]

Hi, Sorry for posting here, it was my something mistake.