no display / mobo code on Aw9D-Max

[jackvdbuk]

constantly having problems with the motherboard, not used it yet but at first i tried some OCZ RAM with a E6550 (probly cant support it as its 1333FSB) then tried one stick of ebuyer DDR2 RAM with a el cheapo celeron...

constantly getting the 6F and C1 error codes any help?

[BUFF]

which exact OCZ?
try it with just 1 DIMM installed.
afaik it can support 1333fsb CPUs (even 45nm) but will probably need a bIOS flash.

[jackvdbuk]

its the OCZ Nvidia modules 2x2GB, the unnamed ebuyer ram was 512mb.

the motherboard can support 1333fsb after a flash ... which is the exact reason i tried it with the cheapo ram and celeron!

[Adhesion]

Have you tried a full bios clear? change cmos jumper position, remove battery, turn of power @ PSU or wall wait a minute, change jumper back, put battery back in, power on PSU.

Then try and boot with your celeron and try your cheap ram in different slots.