Page 2 of 2 FirstFirst 12
Results 17 to 27 of 27

Thread: Screen not Switching on, No Boot sounds either.

  1. #17
    Registered+
    Join Date
    Mar 2007
    Posts
    38
    Thanks
    0
    Thanked
    0 times in 0 posts
    oops wrong thread,sorry

  2. #18
    ved
    ved is offline
    Registered User
    Join Date
    Apr 2007
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts
    Quote Originally Posted by Deathcore View Post
    I have the exact same problem as the TC, i made my own thread on the board.
    It seems like you 2 are not the only ones. I got exactly the same problem. It seems like the recent batch of HX520s has the same faults.

  3. #19
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    410
    Thanked
    276 times in 252 posts


    sadly i think i've contracted another faulty one. it worked for a while but now its just..

    arghh. same thing this time. except psu fan doesnt spin as fast. graphics card fan spinning top speed, seems like mobo isnt getting the ok signal to post from the psu again , i tried resetting the bios/clearing cmos. 2 dead hx520's here. im gonna go back and try to make it work.

    fingers crossed.

    @Yellowbeard, isn't there any other region I could rma the psu to except for california? it would cost me £28 just to send it there, which is almost half the psu price!

  4. #20
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts
    Quote Originally Posted by moogle View Post
    @Yellowbeard, isn't there any other region I could rma the psu to except for california? it would cost me £28 just to send it there, which is almost half the psu price!
    Currently, we do not have an RMA option outside the continental US (California).

    Have you made any progress with this issue? With 2 back to back failing PSUs I'd suspect some other problem.

  5. #21
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    410
    Thanked
    276 times in 252 posts
    nah actually the 2nd psu worked fine now for some reason. but the mobo doesnt so its ok for now.

  6. #22
    Registered+
    Join Date
    Sep 2006
    Location
    Leuchars, UK
    Posts
    49
    Thanks
    0
    Thanked
    1 time in 1 post
    Thought I should update this thread with my own issue. Tried to boot the computer today and had same symptoms - all fans run, lights on m/board & x-fi, but no beep or video display. I have had the PSU (HX620) in the computer since buying it when they first came out (early this year i think). Have spent the last 2 hours messing about and searching on here (using my PS3!!!!). Thankfully I found this thread, so i'll now look for the receipt and send the PSU back.

    edit: Have just tied an antec psu I had lying in another case, but i still get the same problem. Back to the start... Have also swapped graphics cards and tried a boot with no ram fitted. without the ram fitted i get continuous beeps, but still no video....

    edit 2: just tried removing one ram chip and booting and it worked. I think i would have found it earlier after removing both chips, but as there was no display I expected it to be something else. At least it is okay now, just gotta send this chip back, but will I have to send them both as a pair??
    Last edited by ibiris; 19-06-2007 at 01:12 PM. Reason: update....

  7. #23
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    410
    Thanked
    276 times in 252 posts
    also what i found out is, with the working psu, when you switch it on using the paperclip, ie connect green to black the working one's fan spins slowly, but my broken one spins at full speed. just so you guys should know that could help you in determining whats at fault.

  8. #24
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts
    Quote Originally Posted by ibiris View Post
    Thought I should update this thread with my own issue. Tried to boot the computer today and had same symptoms - all fans run, lights on m/board & x-fi, but no beep or video display. I have had the PSU (HX620) in the computer since buying it when they first came out (early this year i think). Have spent the last 2 hours messing about and searching on here (using my PS3!!!!). Thankfully I found this thread, so i'll now look for the receipt and send the PSU back.

    edit: Have just tied an antec psu I had lying in another case, but i still get the same problem. Back to the start... Have also swapped graphics cards and tried a boot with no ram fitted. without the ram fitted i get continuous beeps, but still no video....

    edit 2: just tried removing one ram chip and booting and it worked. I think i would have found it earlier after removing both chips, but as there was no display I expected it to be something else. At least it is okay now, just gotta send this chip back, but will I have to send them both as a pair??
    What specific RAM do you have?

  9. #25
    Registered+
    Join Date
    Sep 2006
    Location
    Leuchars, UK
    Posts
    49
    Thanks
    0
    Thanked
    1 time in 1 post
    Quote Originally Posted by Yellowbeard View Post
    What specific RAM do you have?
    2x 1gb Cellshock PC2-8000. Phoned Memory Configurator who supplied them and i can RMA them. Only problem is i'm going to be without a pc for however long it takes to sort - around 10 days i think. So I might order another 2gb of the same memory (which is now £100 cheaper than when I bought it in November), and then make it 4gb when the replacements arrive. Unless of course they offer a full refund, but I think that can only be done if they develop a fault within the first 14 or 28 days.

  10. #26
    Registered User
    Join Date
    Oct 2007
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Screen not Switching on, No Boot sounds either.

    Quote Originally Posted by ibiris View Post
    Thought I should update this thread with my own issue. Tried to boot the computer today and had same symptoms - all fans run, lights on m/board & x-fi, but no beep or video display. I have had the PSU (HX620) in the computer since buying it when they first came out (early this year i think). Have spent the last 2 hours messing about and searching on here (using my PS3!!!!). Thankfully I found this thread, so i'll now look for the receipt and send the PSU back.

    edit: Have just tied an antec psu I had lying in another case, but i still get the same problem. Back to the start... Have also swapped graphics cards and tried a boot with no ram fitted. without the ram fitted i get continuous beeps, but still no video....

    edit 2: just tried removing one ram chip and booting and it worked. I think i would have found it earlier after removing both chips, but as there was no display I expected it to be something else. At least it is okay now, just gotta send this chip back, but will I have to send them both as a pair??

    DITTO for me...everything spins up, nothing happens. HX520 on an Abit IP35E. The difference is, I had an older seasonic PSU on the same board with the same everything else and prior to installing the HX520, it worked fine. I put the 520 on, no go, then went back to the Seasonic, now it doesn't work either! I didn't do anything else to the system, just swapped the PSUs. Now I don't know what works and what doesn't. I have some new RAM coming on Wednesday, I'll see what happens then, but at this point, I'm planning to RMA the motherboard and PSU and get completely different components.

    I too pulled all components, including one stick of my Ballistix RAM, and pulled the motherboard out of the case and box tested it. No changes, no matter what I do.

  11. #27
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    410
    Thanked
    276 times in 252 posts

    Re: Screen not Switching on, No Boot sounds either.

    might have messed your components up. my first hx520w was faulty and I tried it on my high end mobo and it didn't work. Then I took it to my sisters pc and the same thing happened only this time after removing it and putting my sis's one back it stopped working also. I can only assume it busted the mobo because it was a old athlon one. not high quality like my other one.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 12
    Last Post: 11-04-2008, 11:57 PM
  2. Laptop Screen to Desktop Screen?
    By Xaneden in forum Graphics Cards
    Replies: 2
    Last Post: 09-07-2006, 07:25 PM
  3. NF7-S2 Will not boot from IDE or Sata
    By ikonia in forum Help! Quick Relief From Tech Headaches
    Replies: 2
    Last Post: 08-11-2005, 01:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •