Page 2 of 3 FirstFirst 123 LastLast
Results 17 to 32 of 45

Thread: ATI Catalyst 10.3a

  1. #17
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    I have an email from ATi saying that 10.3 should fix the issue. I have an email from XFX telling me to wait for the 10.3 before RMA. So, I'm hanging on till then, and if they don't work I'll RMA.
    Society's to blame,
    Or possibly Atari.

  2. #18
    Senior Member watforddude's Avatar
    Join Date
    Apr 2007
    Location
    The Shire
    Posts
    1,341
    Thanks
    84
    Thanked
    49 times in 37 posts
    • watforddude's system
      • Motherboard:
      • MSI Z97
      • CPU:
      • Intel 4790k
      • Memory:
      • 8GB Corsair Dom
      • Storage:
      • 1TB WD
      • Graphics card(s):
      • 980 GTX
      • PSU:
      • Corsair 650TX
      • Case:
      • The Bedroom Floor
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 23" LG
      • Internet:
      • 80MB Infinity

    Re: ATI Catalyst 10.3a

    Well if it does not fix the issue the card (4850) is from sapphire and I have no receipt, do you think they would just tell me to piss off?
    Quote Originally Posted by snootyjim View Post

    with 29 minutes to go the watford dude saved the day!


  3. #19
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    Can you not find any evidence of the purchase ? Otherwise, I believe that you'll have to rely on the manufacturer's warranty. take a note of the serial number and give them a call. Scan service may be able to help you with the process to follow.
    Society's to blame,
    Or possibly Atari.

  4. #20
    Senior Member
    Join Date
    Feb 2004
    Posts
    1,891
    Thanks
    218
    Thanked
    61 times in 53 posts
    • jonathan_phang's system
      • Motherboard:
      • Asus Rampage III Extreme
      • CPU:
      • i7 930 @ 4.2 ghz (200x21)
      • Memory:
      • 12GB Corsair XMS3 1600
      • Storage:
      • Crucial M4 128GB SSD + Misc Data Drive
      • Graphics card(s):
      • EVGA GTX 1080 FTW
      • PSU:
      • Corsair HX850 Modular
      • Case:
      • Antec 300
      • Operating System:
      • Windows 7 x64
      • Monitor(s):
      • Asus PB278Q (27" 2560x1440)
      • Internet:
      • Virgin Media 100mb

    Re: ATI Catalyst 10.3a

    No issues so far on an OCed 5850 on 10.2... may have to install these over the weekend to give them a go. Any improvement in Crysis is welcome!

  5. #21
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    The non WHQL drivers are here...
    http://sites.amd.com/us/underground/...3-preview.aspx
    The WHQL set should be out on 24th March.
    Society's to blame,
    Or possibly Atari.

  6. Received thanks from:

    jonathan_phang (18-03-2010)

  7. #22
    Senior Member watforddude's Avatar
    Join Date
    Apr 2007
    Location
    The Shire
    Posts
    1,341
    Thanks
    84
    Thanked
    49 times in 37 posts
    • watforddude's system
      • Motherboard:
      • MSI Z97
      • CPU:
      • Intel 4790k
      • Memory:
      • 8GB Corsair Dom
      • Storage:
      • 1TB WD
      • Graphics card(s):
      • 980 GTX
      • PSU:
      • Corsair 650TX
      • Case:
      • The Bedroom Floor
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 23" LG
      • Internet:
      • 80MB Infinity

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by Phage View Post
    Can you not find any evidence of the purchase ? Otherwise, I believe that you'll have to rely on the manufacturer's warranty. take a note of the serial number and give them a call. Scan service may be able to help you with the process to follow.
    Any idea how long the manufacturer's warranty lasts? 2 years I would assume.
    Quote Originally Posted by snootyjim View Post

    with 29 minutes to go the watford dude saved the day!


  8. #23
    Moosing about! CAT-THE-FIFTH's Avatar
    Join Date
    Aug 2006
    Location
    Not here
    Posts
    32,039
    Thanks
    3,910
    Thanked
    5,224 times in 4,015 posts
    • CAT-THE-FIFTH's system
      • Motherboard:
      • Less E-PEEN
      • CPU:
      • Massive E-PEEN
      • Memory:
      • RGB E-PEEN
      • Storage:
      • Not in any order
      • Graphics card(s):
      • EVEN BIGGER E-PEEN
      • PSU:
      • OVERSIZED
      • Case:
      • UNDERSIZED
      • Operating System:
      • DOS 6.22
      • Monitor(s):
      • NOT USUALLY ON....WHEN I POST
      • Internet:
      • FUNCTIONAL

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by Terbinator View Post
    Sorreh, i just couldn't find the Nvidia thread relating too it
    I was only ribbing you! It is good to see that Nvidia also has its peformance driver out!

    Quote Originally Posted by Phage View Post
    Apologies if you thought I was being aggressive. I certainly didn't mean it to be !
    The 10.3's have had rave reviews all over, and ATi have assured me that they will fix the crashes, but I agree with you. It smells like a hardware issue, specifically something to do with the RAM from the symptoms I'm getting.

    I'm just dreading the RMA process...I'll have no PC for however long it takes unless I lay out more cash to buy another card.
    Hopefully the 10.3a drivers will help. I can understand your annoyance as I would feel the same if I bought high end hardware and it had issues.

    Quote Originally Posted by watforddude View Post
    Well I don't know what the GSOD is, but recently since when im playing a game (almost everytime now) the screen will just go black and I will have to hard reboot, Alt Tab don't work, Ctrl Alt Delete don't work so I assume that is what I have?
    I would try gaming with the CPU at stock speeds first to see if it crashes are due to the graphics card. Also reinstalling the drivers helps sometimes.

  9. #24
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by watforddude View Post
    Any idea how long the manufacturer's warranty lasts? 2 years I would assume.
    Varies greatly - check out their website, but I would expect 2 years.
    Society's to blame,
    Or possibly Atari.

  10. #25
    Senior Member watforddude's Avatar
    Join Date
    Apr 2007
    Location
    The Shire
    Posts
    1,341
    Thanks
    84
    Thanked
    49 times in 37 posts
    • watforddude's system
      • Motherboard:
      • MSI Z97
      • CPU:
      • Intel 4790k
      • Memory:
      • 8GB Corsair Dom
      • Storage:
      • 1TB WD
      • Graphics card(s):
      • 980 GTX
      • PSU:
      • Corsair 650TX
      • Case:
      • The Bedroom Floor
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 23" LG
      • Internet:
      • 80MB Infinity

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by CAT-THE-FIFTH View Post
    I was only ribbing you! It is good to see that Nvidia also has its peformance driver out!



    Hopefully the 10.3a drivers will help. I can understand your annoyance as I would feel the same if I bought high end hardware and it had issues.



    I would try gaming with the CPU at stock speeds first to see if it crashes are due to the graphics card. Also reinstalling the drivers helps sometimes.
    when you say stock speeds, is that the speeds that are runnign when the card isn't doing anything or when i have overdrive enabled and its at 600-950
    Quote Originally Posted by snootyjim View Post

    with 29 minutes to go the watford dude saved the day!


  11. #26
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    I think he means to eliminate the CPU overclock as a possible cause of any crashes.
    Society's to blame,
    Or possibly Atari.

  12. #27
    Senior Member
    Join Date
    Apr 2009
    Location
    Brentwood, Essex
    Posts
    1,364
    Thanks
    3
    Thanked
    43 times in 39 posts
    • sammorris's system
      • Motherboard:
      • P55A-UD4 / Z68MX-UD2H / Z97N-WiFi
      • CPU:
      • i5-750@3.8 / 3470 / 4690S
      • Memory:
      • 12GB XMS / 8GB XMS / 16GB XMS
      • Storage:
      • SSD in every build, 53TB fileserver
      • Graphics card(s):
      • GTX970 / HD7770 / GTX960 ITX
      • PSU:
      • ZM850-HP/ CX500 / RM650
      • Case:
      • HAF 932 / NZXT Lexa / Fractal Node 304
      • Operating System:
      • Win 8.1 / Win 8.1 / Win 10 IP
      • Monitor(s):
      • UP3214Q / U2312HM x2
      • Internet:
      • Enta FTTC 70/20

    Re: ATI Catalyst 10.3a

    From everything I've read, GSODs sound like a hardware problem being masked by supposedly dodgy drivers - software taking the rap for bad hardware, rather than usually the reverse. I know a good few people with HD5000 series cards, and none of them have had any GSODs so far.
    I expect to pick up a 5870 of my own in 6 weeks or so, so I'll see if they happen to me or not.
    As for the drivers themselves though, I am a little annoyed that ATI dropped the idea of downloadable application profiles. It sounded like a very promising system, but perhaps unsurprisingly, they never implemented it, and no doubt the link to the application will be removed from the site in due course. More annoyingly, when I posted to complain about this on the AMD Game forum, it took mere minutes for the post to be deleted from the forums.

  13. #28
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    Ok have loaded the 10.3a driver. I won't be able to give it a full workout untilTuesday, but I'm still getting a flicker at logon.

    EDIT: Ran the Heaven benchmark at 1920x1080 4xAA all features on high and average 42.8 FPS for a score of 1078. Never looked like crashing. Games on Tuesday !
    Last edited by Phage; 18-03-2010 at 09:40 PM.
    Society's to blame,
    Or possibly Atari.

  14. #29
    Butter king GheeTsar's Avatar
    Join Date
    Jan 2009
    Location
    The shire of berks
    Posts
    2,106
    Thanks
    153
    Thanked
    260 times in 163 posts
    • GheeTsar's system
      • Motherboard:
      • Gigabyte GA-Z68XP-UD3P
      • CPU:
      • Intel i5 2500k
      • Memory:
      • Corsair 8GB
      • Storage:
      • Samsung EVO 850 1 TB + 2 x 1TB Storage
      • Graphics card(s):
      • ASUS Radeon R9 280X
      • PSU:
      • Tagan TG600-U33 600W
      • Case:
      • Fractal Design Define R3
      • Operating System:
      • Windows 10
      • Monitor(s):
      • Acer 24" 120Hz GD245HQ
      • Internet:
      • Virgin 100mb

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by Phage View Post
    ...but I'm still getting a flicker at logon.
    I get a flicker on login too - but (touches wood) I've not had the GSOD (yet?). Not tried these new drivers - I think I will wait until the WHQL ones. Glad to hear it looks like your new card is fixed (or have I spoken too soon!)

  15. #30
    Headless Chicken Terbinator's Avatar
    Join Date
    Apr 2009
    Posts
    7,670
    Thanks
    1,210
    Thanked
    727 times in 595 posts
    • Terbinator's system
      • Motherboard:
      • ASRock H61M
      • CPU:
      • Intel Xeon 1230-V3
      • Memory:
      • Geil Evo Corsa 2133/8GB
      • Storage:
      • M4 128GB, 2TB WD Red
      • Graphics card(s):
      • Gigabyte GTX Titan
      • PSU:
      • Corsair AX760i
      • Case:
      • Coolermaster 130
      • Operating System:
      • Windows 8.1 Pro
      • Monitor(s):
      • Dell Ultrasharp U2711H
      • Internet:
      • Virgin Media 60Mb.

    Talking Re: ATI Catalyst 10.3a

    Quote Originally Posted by GheeTsar View Post
    I get a flicker on login too - but (touches wood) I've not had the GSOD (yet?). Not tried these new drivers - I think I will wait until the WHQL ones. Glad to hear it looks like your new card is fixed (or have I spoken too soon!)
    No, but you have jinxed him instead
    Kalniel: "Nice review Tarinder - would it be possible to get a picture of the case when the components are installed (with the side off obviously)?"
    CAT-THE-FIFTH: "The Antec 300 is a case which has an understated and clean appearance which many people like. Not everyone is into e-peen looking computers which look like a cross between the imagination of a hyperactive 10 year old and a Frog."
    TKPeters: "Off to AVForum better Deal - £20+Vat for Free Shipping @ Scan"
    for all intents it seems to be the same card minus some gays name on it and a shielded cover ? with OEM added to it - GoNz0.

  16. Received thanks from:

    Phage (19-03-2010)

  17. #31
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by GheeTsar View Post
    I get a flicker on login too - but (touches wood) I've not had the GSOD (yet?). Not tried these new drivers - I think I will wait until the WHQL ones. Glad to hear it looks like your new card is fixed (or have I spoken too soon!)
    I'll keep you posted. The benchmark ran like silk, but gaming is where time will tell.
    Society's to blame,
    Or possibly Atari.

  18. #32
    Butter king GheeTsar's Avatar
    Join Date
    Jan 2009
    Location
    The shire of berks
    Posts
    2,106
    Thanks
    153
    Thanked
    260 times in 163 posts
    • GheeTsar's system
      • Motherboard:
      • Gigabyte GA-Z68XP-UD3P
      • CPU:
      • Intel i5 2500k
      • Memory:
      • Corsair 8GB
      • Storage:
      • Samsung EVO 850 1 TB + 2 x 1TB Storage
      • Graphics card(s):
      • ASUS Radeon R9 280X
      • PSU:
      • Tagan TG600-U33 600W
      • Case:
      • Fractal Design Define R3
      • Operating System:
      • Windows 10
      • Monitor(s):
      • Acer 24" 120Hz GD245HQ
      • Internet:
      • Virgin 100mb

    Re: ATI Catalyst 10.3a

    Quote Originally Posted by Terbinator View Post
    No, but you have jinxed him instead


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. ATI CATALYST problem
    By Jonessie in forum Graphics Cards
    Replies: 4
    Last Post: 16-11-2009, 01:31 PM
  2. Replies: 13
    Last Post: 25-07-2009, 05:12 PM
  3. GeForce GTS Series
    By scaryjim in forum Graphics Cards
    Replies: 25
    Last Post: 08-03-2009, 12:01 AM
  4. ATI Catalyst 5.5 Available
    By Steve in forum HEXUS News
    Replies: 5
    Last Post: 18-05-2005, 10:00 PM
  5. ATi CATALYST 5.4 software suite
    By Steve in forum HEXUS News
    Replies: 13
    Last Post: 12-04-2005, 05:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •