Results 1 to 6 of 6

Thread: Are these temps high?

  1. #1
    Senior Member
    Join Date
    Feb 2009
    Location
    Castle Gresley
    Posts
    628
    Thanks
    28
    Thanked
    18 times in 18 posts
    • marshalex's system
      • Motherboard:
      • Asus P6T bios 1303
      • CPU:
      • Intel Core i7 920 @ 3.8Ghz
      • Memory:
      • 12GB Kingston Hyper X DDR3 1600MHz
      • Storage:
      • Samsung 840, WD Caviar Black 640Gb, WD Caviar Blue 1TB
      • Graphics card(s):
      • XFX Radeon HD 6950 XXX @915 MHz
      • PSU:
      • Antec TruePower New 650W
      • Case:
      • Coolermaster CM690
      • Operating System:
      • Windows 7 Professional x64
      • Monitor(s):
      • Dell ST2210
      • Internet:
      • Sky Fibre 38MB

    Are these temps high?

    I brough a few replacement fans for my case recently (cm690) and thought while i was sorting that all out i'd try and reset my titan fenrir cooler so it points towards the back rather than up. After resticking it on with some thermalright CF2 and keeping the same overclock I had before (3.48 (21x1.66)) the idle temp is 45 and the load temp (using OCCT Linpack) is 74. Are these temps right or should i be getting much lower temps than that? Any advice would be appreciated!

  2. #2
    Senior Member
    Join Date
    Mar 2008
    Posts
    797
    Thanks
    66
    Thanked
    71 times in 70 posts
    • kmac's system
      • Motherboard:
      • Gigabyte GA-P55-US3L
      • CPU:
      • Intel Core i5 750
      • Memory:
      • 2GB Corsair DDR3
      • Storage:
      • 2 Samsung F3 500GB each
      • Graphics card(s):
      • ATI HD4770
      • PSU:
      • Enermax Modu 82+ 525W
      • Case:
      • Lain -Li PC-7FN Black
      • Operating System:
      • Windows 7 Prof 64 Bit
      • Monitor(s):
      • Dell U2412M

    Re: Are these temps high?

    Look okay - see here for more info on test done by AnadTech

    http://enthusiast.hardocp.com/articl...rclocking_heat

  3. #3
    Senior Member
    Join Date
    Oct 2008
    Location
    Bedford/Leicester
    Posts
    535
    Thanks
    52
    Thanked
    45 times in 45 posts
    • Hawker1986's system
      • Motherboard:
      • Biostar Tpower X58A / Gigabyte X58A-UD5
      • CPU:
      • i7 950@4Ghz TRUE / i7 920@4Ghz H50-1
      • Memory:
      • 6GB Crucial Ballistix@1336mhz / 6GB Corsair XMS3@1528mhz
      • Storage:
      • 128GB G.Skill Falcon + 1.5TB + 2x400GB / Corsair Force 3 120GB SSD + 1.5TB + 500GB
      • Graphics card(s):
      • 5850@825/1150 / 5870@900/1300
      • PSU:
      • Enermax Liberty 620W / Corsair HX850
      • Case:
      • Antec P182 / Silverstone FT02B
      • Operating System:
      • Windows 7 x64 Ultimate / Windows 7 x64 Ultimate
      • Monitor(s):
      • Dell E248WFP 24" / Benq G2420HDBL 24"
      • Internet:
      • 10mb Virgin Cable / 24mb Talk Talk ADSL

    Re: Are these temps high?

    Looks fine on that cooler to me.

    Hawker
    Media Centre: C2D E5300@3.6Ghz : Gigabyte G31M-ES2L : 2GB Crucial Ballistix DDR21066@1106mhz : Sapphire HD5450 : Haupaggue WinTV Nova-T 500 : Seasonic 380W : Corsair X32 32GB SSD : WD 250GB HDD : LG Blu-Ray/HDDVD ROM DVD-RW : Scythe Shuriken BIG Quiet : Lian-Li PC-C37 :
    WHS: Zotac 8200 M-ITX WIFI : AMD 4850e : 4GB G.Skill DDR21000 : 6x2TB : Scythe Shuriken Rev.B Quiet LP : Fractal Design Mini Array R2 :
    Laptop: Packard Bell EasyNote BG45-U-300 : 12" : Dual Core T2390 1.87Ghz : 2GB DDR2800 : Corsair X32 32GB SSD : Intel GMA X3100 :


  4. #4
    Poor graduate. Ulti's Avatar
    Join Date
    Feb 2009
    Posts
    2,007
    Thanks
    704
    Thanked
    222 times in 191 posts
    • Ulti's system
      • Motherboard:
      • AsRock B450M Pro4
      • CPU:
      • AMD Ryzen 7 1800X
      • Memory:
      • Team Group Delta 32GB
      • Storage:
      • Samsung 970 EVO+ 500GB
      • Graphics card(s):
      • Palit GTX 1070 8GB
      • PSU:
      • SilverStone SX500-LG V2.0
      • Case:
      • Jonsbo UMX3 TG Version
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • AOC Agon AG322QC4 31.5"
      • Internet:
      • Plusnet Fibre Extra 80/20

    Re: Are these temps high?

    Definitely looks fine, I use an Noctua NH-U12P and on a 3.8ghz overclock I reach about 85C load and run about 45C idle at 2.3ghz ish.

  5. #5
    Registered+
    Join Date
    Jul 2010
    Posts
    27
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Are these temps high?

    looks okay after reading around!

  6. #6
    Senior Member
    Join Date
    Feb 2009
    Location
    Castle Gresley
    Posts
    628
    Thanks
    28
    Thanked
    18 times in 18 posts
    • marshalex's system
      • Motherboard:
      • Asus P6T bios 1303
      • CPU:
      • Intel Core i7 920 @ 3.8Ghz
      • Memory:
      • 12GB Kingston Hyper X DDR3 1600MHz
      • Storage:
      • Samsung 840, WD Caviar Black 640Gb, WD Caviar Blue 1TB
      • Graphics card(s):
      • XFX Radeon HD 6950 XXX @915 MHz
      • PSU:
      • Antec TruePower New 650W
      • Case:
      • Coolermaster CM690
      • Operating System:
      • Windows 7 Professional x64
      • Monitor(s):
      • Dell ST2210
      • Internet:
      • Sky Fibre 38MB

    Re: Are these temps high?

    good stuff, quite glad i'm not going to melt my cpu!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. C2D Overclocking Guide For Beginners P5K Add-On
    By Clunk in forum PC Hardware and Components
    Replies: 638
    Last Post: 28-07-2016, 10:13 AM
  2. i7 920 bundle: temps too high?
    By dna598 in forum SCAN.care@HEXUS :: After sales support
    Replies: 20
    Last Post: 12-11-2012, 05:03 PM
  3. high idle temps
    By looney in forum PC Hardware and Components
    Replies: 37
    Last Post: 25-05-2008, 02:42 PM
  4. quad & high temps
    By RobTi in forum Help! Quick Relief From Tech Headaches
    Replies: 6
    Last Post: 27-08-2007, 07:53 PM
  5. Cpu Temps Too High?
    By Daymonkey in forum PC Hardware and Components
    Replies: 8
    Last Post: 21-09-2004, 05:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •