BSOD issue on RO2 and now BF3 beta?

[j.o.s.h.1408]

Doing the test now. whats this XTREME-burn in test? shall tick that?

[j.o.s.h.1408]

so far running an xtreme burn test on kombustor for about 20mins so far and my gpu teps have not gone above 78c. i have tweaked the fan profile so when its over 75c, the fan speeds around 80%, when it reaches near 90c i make it spin 100%.

will let it run for a few hours. runing full 1080p res screen, dx11 and AA/AF 8x. is this the max load this kombustor app can do?

[GoNz0]

that would be enough to stress test it, if it copes ok run an app to thrash the cpu as well such as intel burn test.

the new fan profiles alone may have cured it. a good chance the beta drivers broke the fan profile

[j.o.s.h.1408]

that would be enough to stress test it, if it copes ok run an app to thrash the cpu as well such as intel burn test.

the new fan profiles alone may have cured it. a good chance the beta drivers broke the fan profile

Hi, i ran intel burn test already during the day for 30 passes and it never bsod. i Also ran the kombuster test for 2hours and all good. maxed temps were 79c only.

[Noxvayl]

The next stress test you should do is running a CPU/RAM intensive task (like prime95) and a GPU intensive task (like Furmark) at the same time. This should simulate the worst possible scenario for your PC and bring heat levels to absolute maximum.

If a PC survives that for a few hours it can be considered rock solid, in terms of hardware stability.

[j.o.s.h.1408]

thx

might try that

[GoNz0]

The next stress test you should do is running a CPU/RAM intensive task (like prime95) and a GPU intensive task (like Furmark) at the same time. This should simulate the worst possible scenario for your PC and bring heat levels to absolute maximum.

If a PC survives that for a few hours it can be considered rock solid, in terms of hardware stability.

P95 does not stress modern CPU's like intel burn test.

josh i said to run intel burn as well as kombustor m8

[j.o.s.h.1408]

well i did not have time to run both for long so i ran it for 10mins and all was well. temps peaked at 82c but it was throttling up and down occasionally as i believe that because the CPU was also getting hammered, the kombuster stress test had some lag

[GoNz0]

see how u get on with the new fan profile then