LinkBack URL
About LinkBacksi am Considering upgrading my current cpu (xp2600+ t/b) to a xp3000 barton (333fsb) , would it be worth it and if so how much faster would it be ?
i am Considering upgrading my current cpu (xp2600+ t/b) to a xp3000 barton (333fsb) , would it be worth it and if so how much faster would it be ?
Probably not. Have you o/c'ed the current one? Also depends on your other system components really.
Not around too often!
my mobo supports the xp3200 (msi kt6 delta lsr) , but i cannot afford the ddr400 mem as well so i would like to stick to 333fsb (present mem 1024 m/b ddr333
Whats your cooling like, I recon you may be able to o/c that chip to 3000+ speeds.
Salazaar : <Touching wood as I write this...>
i tried changing the multiplier from 12.5 but in the bios it says 12.5/13 , and it locks the comp up at 14x166 , any ideas ?
ps: my cpu cooler is a q-tec enhanced overclocker hs/f (i know its a dreaded qtec)
What voltage / temps?
Salazaar : <Touching wood as I write this...>
Have you tried giving the tweaking the fsb a bit? A combination of the two may work. You might have to lower the mem timings though.
Not around too often!
will that damage the ram ? , its major on third ddr333
core center says 1.66v for the cpu and the temp never goes above 45c , even playing farcryOriginally Posted by Platinum
might need a little more voltage then, try a little more and see how you go, keep a eye on the temps, if you have a good cooler 1.85v is about the top you wanna go.
Salazaar : <Touching wood as I write this...>
Shouldn't do. Just won't boot.
Not around too often!
Platinum i have just noticed you have a amd64 3200+ , what they like and howmuch are they ?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote