I beleive so, although havent used it myself. Also have a look at the big scythes and the thermalright 120 extreme.
I beleive so, although havent used it myself. Also have a look at the big scythes and the thermalright 120 extreme.
Not too bothered about this but just out of interest. I can't get above 3.1ghz without random restarts. All the way up to 3.0 is fine, never does it, but above its not stable at all. The temperatures are fine.
This is on a 6300 and a 550w psu. Maybe thats as far as this setup will go?
Have you definately got the ram voltage set correctly? Entered the Timings properly? Added a bit of voltage to the northbridge?
Are the temps ok? What 550w psu is it?
The psu is a antec 550w truepower.
The temps are fine idle at bout 42.
The ram voltage is set to 2.1, The timings set to 4-4-4-12 on geil ultra.
Not changed the northbridge yet.
What about the northbridge temps? Sometimes the heatpipe isnt actually making contact with the NB and it all just gets really hot.
So where do you check the nb temps in bios i take it ?
Asus probe is a good start.
You never guess what comes up when you type in "c2d overclocking" into Google
Very good guide Clunk
Yes, its number 1
Number 2 when you search for c2d overclocking guide.
I wonder how to fix that?
When running Orthos do you want to set the affinity and run 2 versions, one per core?
You dont need to set affinity in orthos, just one version is enough for a dual core
Ahh, I've been running 2 versions, one per core...
Temps here are 54/52, maybe cos one cores working harder, maybe the HSF aint seated properly, maybe the cap thing aint flat..
No need, itll probably send your pagefile daft, unless you manually set the amount of ram to use.
There are currently 12 users browsing this thread. (0 members and 12 guests)