Annoyed -_-

[staffsMike]

P182 is too easy to cable.. it's like cheating lol

[Kev32]

I don't think I'll ever replace my Akasa Eclipse

[TAKTAK]

Ha, knowing my luck if I started tidying it I would mess up and not know where to put one of the cables back into or something. The only way to really do it is to take out all the cables and do it from there, really, meh, aint worth it .

thats what i did at the weekend, i got bored and decided to strip everything out and have a tidy up. i should have waited a few weeks really cos my TRU120E's due soon (wooo f***ing hoo), but i should be able to install it without taking the mobo out, might be a bit tight tho :S, but there should be plenty of room looking at it now



the bays are looking abit empty

edit: maybe i should have taken the side window out :S

[Skyboat]

Good luck installing the TRUE without the backplate behind the motherboard

[TAKTAK]

edit: bloomin thing, this post didn't appear a min ago

[TAKTAK]

Good luck installing the TRUE without the backplate behind the motherboard

my mount is screw in, n you only need the backplate for the pushpin ones, otherwise the screws have nothing to screw into

[Skyboat]

Hmmm don't think I quite follow, haven't got a picture handy have you?

[TAKTAK]

with push pins

nothing for the screws to screw into if you take the pushpins off

my mobo


has screws so the TRUE screws can go right in

edit:should have used the same mounting mechanism to demonstrate really, but you get the picture

[tom18230]

My heatsink fan is covering one of my RAM slots... just wondering actually, can you mount the heatsink fan on any side, or does it need to go on 1 specific side due tot he airflow?

[staffsMike]

It can go on any side by design. It's best to have it facing out though, which in the 900 is from the bottom up or where you have it now

this is my ninja. Works very well like this

[tom18230]

I have it on the side.
So is it better if I have pointing to the bottom of the case?
That means I could access RAM (there is none in it at the moment ), without be scared of knocking the heatsink off

[Skyboat]

with push pins

nothing for the screws to screw into if you take the pushpins off

my mobo


has screws so the TRUE screws can go right in

edit:should have used the same mounting mechanism to demonstrate really, but you get the picture

Aha, AM2. For some reason I looked at your PC's photo and assumed Intel.

I blame the Zalman cooler

[TAKTAK]

I blame the Zalman cooler

i do too , bloomin things terrible, can't handle 100%load, temps just rocket and it gets annoying hence my upgrade to the TRUE

[staffsMike]

I have it on the side.
So is it better if I have pointing to the bottom of the case?
That means I could access RAM (there is none in it at the moment ), without be scared of knocking the heatsink off

If it's normal size RAM you can just lift the fan up a bit higher, i've done that before.

I would point it up towards that 200mm fan if it's an antec 900. You'll be trapping the air around the gfx card if you point it down and it will also fight against the 200mm.

[EtheAv8r]

Antec P180 and P182 both just fine with Seasonic PSUs.

[TGA]

so would anyone reccomend a Computer hardware and software at amazing prices, available online from Scan Computers UK with an antec p182.... plus it has to power those 3 massive fans a quad core q9450 and a 9800gtx xfx oc'ed and i plan on oc'ing cpu aswell... i am just not sure 500w is enough plus... i need all the cables to reach everywhere well